Conductivity Electrodes
Cole-Parmer WTW TetraCon 925-3 IDS Conductivity Probe, 2000 mS; 3 m Cable
The range of this conductivity probe is 10 S to 2000 mS at 0.5 % of value.
Cole-Parmer Conductivity Cell, K=1.0, 10 KOhm ATC, Glass; Type F
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Cole-Parmer Conductivity Cell, K=10.0, 10 Kohm ATC, CPVC body
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Sigma Aldrich Fine Chemicals Biosciences Thermal Conductivity Fib
SRM 1450e cert SRM 1450e SDSThis Standard Reference Material (SRM) is intended primarily for use in the measurement of the thermal conductivity or thermal resistance of insulation materials. SRM 1450e is a high-density fibrous glass board certified for bulk density and thermal conductivity. The SRM can be used in conjunction with ASTM C177 or ASTM C518. A unit of SRM 1450e consists of a square panel of fibrous glass and phenolic binder molded into a semi-rigid board. The nominal dimensions of a unit are 610 mm x 610 mm x 25 mm.
Cole-Parmer Hach 3422C3A Contacting Conductivity Cell, 1000 ohm Pt RTD, titanium, K=1.0
Nonmetallic Ryton PPS cells 19065-55 and -57 have graphite electrode with 34" NPT(M) threads for mounting onto a 34" pipe tee or immersion applications. Sensor includes built-in 1000 Pt RTD and 20-ft (6-m) cable. PVDF cells 19065-60 through -68 have titanium electrodes with either 12" or 34" NPT(M) compression fitting for mounting onto a pipe tee with up to four inches of insertion depth. Reversing the compression fitting enables the sensor to be fastened onto the end of an immersion pipe. Cells include built-in 1000 Pt RTD and 20-ft (6-m) cable.
Cole-Parmer Conductivity Probe, 2-cell, K = 10.0, Epoxy Body/Pt Bands, 2.5-ft Cable
Keep your multiparameter meters up and running with replacement conductivity probes.
Cole-Parmer Oakton Flat-Surface Conductivity Probe, K = 1.0, 1 m Cable
If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.
Hach Company Probe Cable Depth Markers for Rugged IntelliCAL Probes
Taking readings at specific depths with rugged outdoor electrodes is a snap with these depth markers. Visually identify the depth of your electrode by attaching depth marker securely on cable at points to meet your needs. Five markers per package.Note: For use with rugged outdoor electrodes only.
Hach Company Contacting Conductivity Sensor, Mid-Range Conductivity, K=1.0, 3/4" Kynar Compression Fitting
Nominal Cell Constant (K) = 1.0, 3/4 inch NPT Kynar (PVDF) Compression Fitting, 6m (20ft) Analog Cable, Titanium Electrode